Concept Guide
1414| show crypto ipsec Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Transform set default-aes: {esp-aes256 esp-sha-hmac }
will negotiate = {Transport, Tunnel }
Transform set newset: {esp-3des esp-sha-hmac }
will negotiate = {Transport, Tunnel }
Transform set name: {esp-aes256-gcm esp-sha-hmac }
will negotiate = {Transport, Tunnel }
Use the peer parameter to view details about an IPsec connection
(host) #show crypto ipsec sa peer 80.254.65.210
Initiator IP: 80.254.65.210
Responder IP: 10.69.69.16
Initiator: No
Initiator cookie:018006409496dde5 Responder cookie:659f346abddccaf7
SA Creation Date: Fri Jun 25 13:21:23 2010
Life secs: 7200
Initiator Phase2 ID: 10.69.16.7/255.255.255.255
Responder Phase2 ID: 0.0.0.0/0.0.0.0
Phase2 Transform: EncAlg:esp-3des HMAC:esp-sha-hmac
Encapsulation Mode:UDP-encapsulated Tunnel
IP Compression Disabled
PFS: No
OUT SPI 1b0aa012, IN SPI 1b5c5300
Inner IP 10.69.16.7, internal type C
Aruba VIA
Reference count: 3
Related Commands
Command Description Mode
crypto ipsec
Use this command to configure IPsec
parameters.
Config mode
Command History
Version
Modification
ArubaOS 3.0 Command introduced.
ArubaOS 6.4.4.0 The output of the show crypto SApeer command is enhanced to display IP
compression settings.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or
local controllers