Concept Guide

show controller-ip
show controller-ip
Description
Show controller’s country and domain upgrade trail.
Syntax
No parameters.
Example
The output of this command shows the controller’s IP address and VLAN interface ID.
(host) # show controller-ip
Switch IP Address: 10.168.254.221
Switch IP is configured to be Vlan Interface: 1
Command History
This command was available in ArubaOS 3.4
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show controller-ip | 1402