Concept Guide

show ap papi-err
show ap papi-err {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}
Description
Show PAPIerror messages.
Syntax
Parameter Description
ap-name <ap-name>
Show data for an AP with a specific name.
bssid <bssid>
Show data for a specific Basic Service Set Identifier (BSSID) on an AP. The
Basic Service Set Identifier (BSSID) is usually the AP’s MAC address.
ip-addr <ip-addr>
Show data for an AP with a specific IP address by entering its IP address in
dotted-decimal format.
ip6-addr <ip6-addr>
Show data for an AP with a specific IPv6 address by entering its IPv6 address in
dotted-decimal format.
Examples
The output of the command displays the status.
(host) #show ap papi-err
STM SAP PAPI Send Error
-----------------------
Name bssid ip Tunnel Add Tunnel Remove Arp Req Vlan Req Sta Req Mcast Req
---- ----- -- ---------- ------------- ------- -------- ------- ---------
Command History
Version Modification
ArubaOS 3.0. Command introduced
ArubaOS 6.3 The ip6 parameter was added.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap papi-err | 1233