Concept Guide

show ap debug system-status
show ap debug system-status
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
ip6-addr <ip6-addr>
Description
Show detailed system status information for an AP.
Syntax
Parameter Description
ap-name <ap-name>
Show system status data for an AP with a specific name.
bssid <bssid>
Show system status data for a specific Basic Service Set Identifier (BSSID) on
an AP. The Basic Service Set Identifier (BSSID) is usually the AP’s MAC
address.
ip-addr <ip-addr>
Show system status data for an AP with a specific IP address by entering an IP
address in dotted-decimal format.
ip6-addr <ip6-addr>
Show system status data for an AP with a specific IPv6 address by entering an
IPv6 address in dotted-decimal format.
Usage Guidelines
Issue this command under the guidance of Dell technical support to troubleshoot network issues. The output
of this command displays the following types of information (if it exists) for the selected AP:
l Bootstrap information l Per-radio statistics l Ethernet duplex/speed
settings
l Descriptor Usage l Encryption statistics l Tunnel heartbeat stats
l Interface counters l AP uptime l Boot version
l MTU discovery l memory usage l LMS information
l ARP cache l Kernel slab statistics l Power status
l Route table l Interrupts l CPU type
l Interface Information l Crash Information l CPU usage statistics
l System Status Script
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap debug system-status | 1146