Concept Guide

Parameter Description
Authentication Failure Blacklist Time
Shows the time, in
seconds, a client is
blocked if it fails repeated
authentication. If the
virtual AP shows a value of
0, a blacklisted client is
blocked indefinitely.
Fast Roaming
Shows if the AP has
enabled or disabled fast
roaming.
Strict Compliance
If enabled, the virtual AP
denies client association
requests if the AP and
client station have no
common rates defined.
Some legacy client
stations which are not fully
802.11-compliant may not
include their configured
rates in their association
requests. Such non-
compliant stations may
have difficulty associating
with APs unless strict
compliance is disabled.
VLAN Mobility
Shows if a virtual AP has
enabled or disabled VLAN
(Layer-2) mobility
Remote-AP Operation
Shows when the virtual AP
operates on a remote AP:
l always—Permanently
enables the virtual AP
(Bridge Mode only).
This option can be
used for non-802.1X
bridge VAPs.
l backup—Enables the
virtual AP if the remote
AP cannot connect to
the controller (Bridge
Mode only). This option
can be used for non-
802.1X bridge VAPs.
l persistent—
Permanently enables
the virtual AP after the
remote AP initially
connects to the
controller (Bridge
Mode only). This option
can be used for any
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap config | 1037