Concept Guide

Parameter Description
Request Retry Interval
Interval, in seconds,
between the first and
second retries of AP-
generated requests. If the
configured interval is less
than 30 seconds, the
interval for subsequent
retries is increased up to
30 seconds.
Maximum Request Retries
Maximum number of
times to retry AP-
generated requests,
including keepalive
messages. After the
maximum number of
retries, the AP either
reboots or tries the IP
address specified by the
backup LMS IP address (if
configured).
Keepalive Interval
Time, in seconds, between
keepalive messages from
the AP
Dump Server
(For debugging purposes.)
Displays the server to
receive the core dump
generated if an AP
process crashes.
Telnet
Reports whether telnet
access the AP is enabled
or disabled.
SNMP sysContact
SNMP system contact
information.
AeroScout RTLS Server
Displays whether or not
the AP will send RFID tag
information to an
AeroScout real-time asset
location (RTLS) server.
RTLS Server configuration
Displays whether or not
the AP will send RFID tag
information to an RTLS
server.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap config | 1013