Concept Guide

6 | About this Guide Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
What is New in This Release
This section lists the new and modified commands in Instant 6.4.3.1-4.2.0.0.
New Commands
The following commands are introduced in this release.
Command Description
dot11a-radio-disable Disables 5 GHz radio without deleting the SSIDprofiles.
dot11g-radio-disable Disables 2.4 GHz radio without deleting the SSIDprofiles.
dpi-error-page-url
Configures custom error page URLs that are displayed when web access is blocked by
AppRF policies.
managed-mode-profile Enables automatic configuration for management mode profiles.
managed-mode-sync-
server
Allows you to retrieve configuration from the server before the scheduled retrieval
period.
mtu
Configures MTU size for tunnel and uplink interfaces.
show radius status
Displays the status of TLS tunnel between the W-IAP and RadSec proxy.
show radseccert
Displays details of the RadSec clientand CA certificates uploaded on the W-IAP.
show ap debug
airwave-restore-status
Displays information about the status of the W-IAP configuration restoration on the W-
AirWave server.
show ap debug
rfc3576-radius-
statistics
Displays the change of authorization (CoA) statistics for the servers configured on a W-
IAP.
show dpi-error-page-
url
Displays the list of URLs of custom error pages that are displayed when web access is
blocked by AppRF policies.
show ids rogue-ap
show ap monitor
rogue-ap
Displays information about the rogue APs detected in the W-IAP network.
web-server
Allows you to configure web server and enable or disable the TLS protocol.
Table 3: New Commands