Concept Guide

590 | wired-port-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Command/Parameter Description Range Default
set-role <attribute>
{{equals| not-equal|starts-
with|
ends-with| contains}
operator>
<role>| value-of}
Assigns a user role to the clients.
The first rule that matches the
configured condition is applied.
You can specify any of the
following conditions:
l contains—The rule is applied
only if the attribute value
contains the specified string.
l ends-with—The rule is applied
only if the attribute value ends
with the specified string.
l equals—The rule is applied
only if the attribute value is
equal to the specified string.
l not-equals—The rule is
applied only if the attribute
value is not equal to the
specified string.
l starts-with—The rule is
applied only if the attribute
value begins with the specified
string.
l value-of - This rule sets the
user role to the value of the
attribute returned. To set a
user role, the value of the
attribute must already be
configured on the W-IAP.
— —
set-role-machine-auth
<machine-only><user-only>
Configures a machine
authentication rule.
You can assign different rights to
clients based on whether their
hardware device supports
machine authentication.
Machine authentication is only
supported on Windows devices,
so this can be used to distinguish
between Windows devices and
other devices such as iPads.
— —
set-role-mac-auth <mac-
only>
Configures a MAC authentication
based user role.
— —
set-role-pre-auth <role>
Configures a pre-authentication
role to allow some access to the
— —