Concept Guide

Table Of Contents
582 | web-server Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
web-server
web-server
ssl-protocol {all|tlsvl|tlsvl.1|tlsvl.2}
no
Description
This command allows you to configure web server and enable or disable the TLS protocol.
Syntax
Parameter Description
ssl-protocol
Enables SSL protocol for secure communication with the web server.
all
Enables all versions of Transport Layer Security (TLS) protocol for
secure communication with the web server.
tlsv1
Enables TLS v1 protocol.
tlsv1.1
Enables TLS v1.1 protocol.
tlsv1.2
Enables TLS v1.2 protocol.
no
Removes the configuration.
Usage Guidelines
Use the web-server command to enable secure communication with the web server through the TLS protocol.
Example
The following example shows how to enable TLS v1.0:
(Instant AP)(config)# web-server
(Instant AP)(web-server)# ssl-protocol tlsv1
(Instant AP)(web-server)# end
(Instant AP)# commit apply
Command History
Version
Description
Dell Networking W-Series
Instant 6.4.3.1-4.2
This command was introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode