Concept Guide

502 | show stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
show stats
show stats {ap <IP-address>| client <MAC-address> | global | network <network-name>} [count]
Description
This command displays the aggregate statistics for W-IAPs, W-IAP clients, W-IAP cluster, and network profiles
configured on a W-IAP.
Syntax
Parameter Description
ap <IP-address>
Displays information on W-IAP utilization, RF trends, and client details for a
specific W-IAP.
client <MAC-address>
Displays information on a client and its mobility records, the cluster to which
the client has joined, and the details of the W-IAP to which it is currently
connected.
global
Displays global statistics for the W-IAP cluster, and the W-IAPs and clients
connected to the W-IAP cluster.
network <network-
name>
Displays aggregate information about a network profile configured on a W-IAP.
[count]
Allows you to filter the command output for the W-IAP, client, global, and
network profile statistics based on the specified number.
Usage Guidelines
Use this command to view the following information about W-IAPs, the clients connected to the W-IAPs, and
the corresponding W-IAP cluster:
l Utilization trend—Displays information about the W-IAP utilization, the number of clients associated with a
W-IAP, Virtual Controller, or the W-IAP network over the last 15 minutes.
l RF trends—Displays information the utilization, noise, or error threshold for a W-IAP. It also shows the
current speed or signal strength for the clients in the network and the RF information for the W-IAPs to
which the clients are connected.
l Mobility Trail—Shows duration of the client is association with a W-IAP and the name of the W-IAP to which
it is currently connected.
Examples
show stats ap
The following example shows the output for the show stats ap <IP-address> command:
Util Level:good
Noise Level:good
Error Level:good
2.4 GHz Channel:7
5.0 GHz Channel:149+
Usage
-----