Concept Guide

44 | auth-failure-blacklist-time Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
auth-failure-blacklist-time
auth-failure-blacklist-time <seconds>
Description
This command allows the W-IAPs to dynamically blacklist the clients when they exceed the authentication
failure threshold.
Syntax
Parameter Description Default
auth-failure-blacklist-
time <seconds>
Configures the duration in seconds for which the
clients that exceed the maximum authentication
failure threshold are blacklisted.
3600
Usage Guidelines
Use this command to dynamically blacklist the clients that exceed the authentication failure threshold
configured for a network profile.
Example
The following example blacklists the clients dynamically:
(Instant AP)(config)# auth-failure-blacklist-time 60
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode