Concept Guide

40 | arm Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Command/Parameter Description Range Default
experience. In the current release, the
client match feature is supported only
within the W-IAPs within the swarm.
calc-interval<seconds>
Configures an interval at which client
match is calculated.
1-600 3
seconds
calc-threshold <threshold>
Configures a threshold that takes
acceptance client count difference among
all the channels of Client match into
account. When the client load on an AP
reaches or exceeds the threshold in
comparison, client match is enabled on
that AP.
1-255 5
client-tresh <tresh>
When the number of clients on a radio
exceeds the value, SLB algorithm will be
triggered.
0-255 30
debug <level>
Displays information required for
debugging client match issues.
0-4
0—none,
1— error,
2—
information,
3—debug,
4—dump
1— error
holdtime <number>
Configures the holdtime for the restrictive
client before the next Client Match action.
1—1800 10
max-adoption <count>
Configure a maximum number for
adopting clients.
0-100 10
max-request <count>
Configures the maximum number of
requests for client match.
0-100 10
nb-matching <percentage>
Configures a percentage value to be
considered in the same virtual RF
neighborhood of Client match.
20-100% 75%
report-interval <interval>
Configures the report interval of VBR on
each AP
30
slb-mode <mode>
Configures a balancing strategy for client
match.
1—3
1—
Channel-
based
1