Concept Guide

show ap client-probe-report
show ap client-probe-report [<radio>]
Description
This command displays the client probe report for a W-IAP.
Syntax
Parameter Description
<radio>
Allows you to filter the output based the ID number of the radio (for example, 0
or 1).
Usage Guidelines
Use this command to view a probe report for the clients associated with a W-IAP.
Example
The following example shows the output of the show ap client-probe-report command.
AP Client Probe Report for Wifi0 (5G)
-------------------------------------
MAC RSSI In Swarm Flags Matched Received
--- ---- -------- ----- ------- --------
00:27:10:a9:98:60 12 No 4 - 1m:5s
60:f8:1d:ad:7f:f0 18 No N - 4s
24:77:03:8f:78:30 24 No 4 - 40s
24:77:03:f7:6d:20 20 No 4 - 17s
00:15:00:5b:3a:50 28 No 4 - 15s
02:36:00:00:00:30 58 No 4 - 45s
0c:84:dc:3b:63:f1 16 No 4 - 3m:27s
6a:10:00:00:00:01 43 No 8 - 2m:33s
Command History
Version Description
Dell Networking W-Series Instant
6.3.1.1-4.0
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap client-probe-report | 271