Concept Guide

236 | show alert global Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Type
code
Description
Code
Detailed Description
1
1 Internal error
The AP has encountered an internal error for this client.
2 Unknown SSID in association request.
The AP cannot allow this client to associate because the association request received
contains an unknown SSID.
3 Mismatched authentication/encryption setting
The AP cannot allow this client to associate because its authentication or encryption
settings do not match AP's configuration.
4 Unsupported 802.11 rate
The AP cannot allow this client to associate because it does not support the 802.11 rate
requested by this client.
5 Maximum capacity reached on W-IAP
The AP has reached maximum capacity and cannot accommodate any more clients.
2
6 Invalid MAC Address
The AP cannot authenticate this client because its MAC address is not valid.
3
7 Client blocked due to repeated authentication failures
The AP is temporarily blocking the 802.1x authentication request from this client
because the credentials provided have been rejected by the RADIUS server too many
times.
8 Authentication server timeout
The AP cannot authenticate this client using 802.1x because the RADIUS server did not
respond to the authentication request. If the AP is using the internal RADIUS server,
recommend checking the related configuration as well as the installed certificate and
passphrase
9 RADIUS server authentication failure
The AP cannot authenticate this client using 802.1x because the RADIUS server
rejected the authentication credentials (password, etc) provided by the client.
Table 11: Client Alert —Type and Description Codes