Concept Guide

show access-rule
show access-rule <name>
Description
This command displays the details of access rules configured for the wired or wireless clients associated with a
W-IAP.
Syntax
Parameter Description
<name>
Displays the access rule configuration details based the name specified for this
parameter.
Usage Guidelines
Use this command to view information an access rule configured for a network profile.
Example
The following example shows the output displayed for the show access-rule command:
Access Rule Profiles
--------------------
Name
----
ethersphere-instant-wpa2
default_wired_port_profile
wired-instant
ethersphere-instant-cp
ethersphere-instant
ether-wired
11-android
On specifying a name of the SSID or the port profile along with the show access-rule <name> command, the
list of access rules configured for the specified profile is displayed. The following example shows the output of
this command:
Access Rules
------------
Dest IP Dest Mask Dest Match Protocol (id:sport:eport) Application Action Log TOS
802.1P Blacklist App Throttle (Up:Down) Mirror DisScan ClassifyMedia
------- --------- ---------- ------------------------- ----------- ------ --- --- ----
-- --------- ---------------------- ------ ------- -------------
any any match any
permit 192.0.2.7
255.255.255.255 match h323-tcp
permit
any any match any
permit 192.0.2.7
255.255.255.255 match h323-udp
permit
any any match dhcp
permit
any any match app bebo
deny
any any match app babylon
deny
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show access-rule | 215