Concept Guide

managed-mode-profile
managed-mode-profile
automatic
config-filename <filename>
debug-managed-mode
download-method <method>
retry-poll-period <time-in-sync>
server <server name>
sync-time day <dd> | hour <hh> | min <mm> | window <window>
username <username>
password <password>
no…
Description
This command is used to enable auto configuration of the W-IAPs in the management mode.
Syntax
Parameter Description
managed-mode-profile
Configures the managed-mode-profile for automatic
configuration.
automatic
Enabled the automatic mode to automatically generate the user
credentials based on AP MAC address.
config-filename <file_name>
Filename—Indicates filename within the alphanumeric format.
Ensure that configuration file name does not exceed 40
characters.
download-method <method>
Denotes the method used for downloading configuration files
(FTP or FTPS).
server <server_name>
Denotes the name of the server or the IP address of the server
from which the configuration file must be downloaded.
sync-time day <dd> hour <hh> min
<mm> window <window>
Configures the day and time at which the W-IAPs can poll the
configuration files from the server.
l day <dd>— Indicates day, for example to configure Sunday
as the day, specify 01. To configure the synchronization
period as everyday, enter 00.
l hour <hh>—Indicates hour within the range of 0-23.
l min <mm>—Indicates minutes within the range of 0-59.
l window <hh>—Defines a window for synchronization of the
configuration file. The default value is 3 hours.
retry-poll-period <time-in-sync>
Configures the time interval in minutes between two retries, after
which W-IAPs can retry downloading the configuration file
username <username>
password <password>
Denotes the user credentials set by the user to enable automatic
configuration.
no…
Removes the configuration.
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide managed-mode-profile | 177