Concept Guide

Parameter Description Range Default
infrastructure-protection-
level <type>
Sets the infrastructure protection level. off, low,
medium, high
off
protect-adhoc-network
Enables protection from adhoc
networks. When adhoc networks are
detected, they are disabled using a
denial of service attack
— —
protect-ap-impersonation
Enables protection from AP
impersonation attacks. When AP
impersonation is detected, both the
legitimate and impersonating AP are
disabled using a denial of service attack.
— —
protect-ssid
Enables use of SSID by valid W-IAPs
only.
— —
protect-valid-sta
Enables protection of valid stations.
When enabled valid stations are not
allowed to connect to an invalid AP.
— —
protect-windows-bridge
Enables protection of a windows station
bridging
— —
rogue-containment
Controls Rogue APs. When rogue APs
are detected, they are not automatically
disabled.
This option automatically shuts down
rogue APs. When this option is enabled,
clients attempting to associate to an AP
classified as a rogue are disconnected
through a denial of service attack.
— —
signature-airjack
Enables signature matching for the
AirJack frame type.
— —
signature-asleap
Enables signature matching for the
ASLEAP frame type.
— —
signature-deassociation-
broadcast
Configures signature matching for the
deassociation broadcast frame type.
— —
signature-deauth-broadcast
Configures signature matching for the
deauth broadcast frame type.
— —
wired-containment
Controls Wired attacks. — —
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ids | 149