Concept Guide

106 | hotspot anqp-3gpp-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
hotspot anqp-3gpp-profile
hotspot anqp-3gpp-profile <profile-name>
3gpp-plmn1…3gpp-plmn6 <PLMN-ID>
enable
no…
Description
This command configures a 3rd Generation Partnership Project (3GPP) Cellular Network for hotspots that have
roaming relationships with cellular operators.
Syntax
Parameter Description
hotspot anqp-3gpp-profile
<profile-name>
Creates a 3GPP profile.
3gpp-plmn1…3gpp-plmn6 <PLMN-ID>
Configures the Public Land Mobile Networks (PLMN) value of the
network. The PLMN value can be specified for first, second, third,
fourth, fifth, and sixth highest priority network.
The PLMN ID consists of a 12-bit Mobile Country Code (MCC) and
the 12-bit Mobile Network Code (MNC).
enable
Activates the configuration profile.
no…
Removes the configuration
Usage Guidelines
Use this command to configure a 3GPP Cellular Network hotspot profile that defines the ANQP information
element (IE) for 3G Cellular Network for hotspots. The IE defined in this profile will be sent in a Generic
Advertisement Service (GAS) query response from a W-IAP in a cellular network hotspot. The 3GPP Mobile
Country Code (MCC) and the 12-bit Mobile Network Code data in the IE can help the client select a 3GPP
network when associated with a hotspot profile and enabled on a WLAN SSID profile.
Example
The following command configures a 3GPP profile:
(Instant AP)(config)# hotspot anqp-3gpp-profile cellcorp1
(Instant AP)(3gpp "cellcorp1")# 3gpp-plmn1 310026
(Instant AP)(3gpp "cellcorp1")# 3gpp_plmn2 208000
(Instant AP)(3gpp "cellcorp1")# 3gpp_plmn3 208001
(Instant AP)(3gpp "cellcorp1")# enable
(Instant AP)(3gpp "cellcorp1")# end
(Instant AP)# commit apply