Concept Guide

Type and
Description
Code
Description Details Corrective Actions
100410 Integrity check failure in
encrypted message
The AP cannot receive data
from this client because the
integrity check of the
received message (MIC)
has failed. Recommend
checking the encryption
setting on the client and on
the AP.
Check the encryption setting on
the client and on the W-IAP.
100511 DHCP request timed out
This client did not receive a
response to its DHCP
request in time.
Recommend checking the
status of the DHCP server in
the network.
Check the status of the DHCP
server in the network.
101012 Wrong Client VLAN VLAN mismatch between
the W-IAP and upstream
device. Upstream device
can be upstream switch or
RADIUS server.
Table 16: Alerts list
IDS
The IDSlink displays a list of foreign APs and foreign clients that are detected in the network. It consists of the
following sections:
l Foreign Access Points Detected— Lists the APs that are not controlled by the Virtual Controller. The
following information is displayed for each foreign AP:
n MAC address— Displays the MAC address of the foreign AP.
n Network— Displays the name of the network to which the foreign AP is connected.
n Classification— Displays the classification of the foreign AP, for example, Interfering W-IAP or Rogue W-
IAP.
n Channel— Displays the channel in which the foreign AP is operating.
n Type— Displays the Wi-Fi type of the foreign AP.
n Last seen— Displays the time when the foreign AP was last detected in the network.
n Where— Provides information about the W-IAP that detected the foreign AP. Click the pushpin icon to
view the information.
l Foreign Clients Detected— Lists the clients that are not controlled by the Virtual Controller. The following
information is displayed for each foreign client:
n MAC address— Displays the MAC address of the foreign client.
n Network— Displays the name of the network to which the foreign client is connected.
n Classification— Displays the classification of the foreign client: Interfering client.
n Channel— Displays the channel in which the foreign client is operating.
n Type— Displays the Wi-Fi type of the foreign client.
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Instant User Interface | 73