Concept Guide

396 | IAP-VPN Deployment Scenarios Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
Configuration Steps CLI Commands UI Procedure
5. Create authentication
servers for user
authentication. The
example in the next
column assumes 802.1X
SSID.
(ap)(config)# wlan auth-server server1
(ap)(Auth Server "server1")# ip 10.2.2.1
(ap)(Auth Server "server1")# port 1812
(ap)(Auth Server "server1")# acctport 1813
(ap)(Auth Server "server1")# key "presharedkey"
(ap)(Auth Server "server1")# exit
(ap)(config)# wlan auth-server server2
(ap)(Auth Server "server1")# ip 10.2.2.2
(ap)(Auth Server "server1")# port 1812
(ap)(Auth Server "server1")# acctport 1813
(ap)(Auth Server "server1")# key "presharedkey"
See
Configuring an
External Server
for
Authentication
6. Configure wired and
wireless SSIDs using the
authentication servers
and access rules, and
enable authentication
survivability.
Configure wired ports to operate in centralized L2 mode and
associate VLAN 20 to the wired port profile.
(ap)(config) # wired-port-profile wired-port
(ap)(wired-port-profile "wired-port")# switchport-
mode access
(ap)(wired-port-profile "wired-port")# allowed-vlan
all
(ap)(wired-port-profile "wired-port")# native-vlan
20
(ap)(wired-port-profile "wired-port")# no shutdown
(ap)(wired-port-profile "wired-port")# access-rule-
name wired-port
(ap)(wired-port-profile "wired-port")# type
employee
(ap)(wired-port-profile "wired-port")# auth-server
server1
(ap)(wired-port-profile "wired-port")# auth-server
server2
(ap)(wired-port-profile "wired-port")# dot1x
(ap)(wired-port-profile "wired-port")# exit
(ap)(config)# enet1-port-profile wired-port
Configure a wireless SSID to operate in centralized L2 mode and
associate VLAN 20 to the WLAN SSID profile.
(ap)(config) # wlan ssid-profile wireless-ssid
(ap)(SSID Profile "wireless-ssid")# enable
(ap)(SSID Profile "wireless-ssid")# type employee
(ap)(SSID Profile "wireless-ssid")# essid wireless-
ssid
(ap)(SSID Profile "wireless-ssid")# opmode wpa2-aes
(ap)(SSID Profile "wireless-ssid")# vlan 20
(ap)(SSID Profile "wireless-ssid")# auth-server
server1
(ap)(SSID Profile "wireless-ssid")# auth-server
server2
(ap)(SSID Profile "wireless-ssid")# auth-
survivability
See
Configuring a
Wired Profile
and Wireless
Network
Profiles
7. Create access rule for
wired and wireless
authentication.
For wired profile:
(ap)(config)# wlan access-rule wired-port
(ap)(Access Rule "wired-port")# rule any any match
any any any
permit
See
Configuring
ACL Rules for
Network
Table 78: W-IAP Configuration for Scenario—GRE: Single Datacenter Deployment with No Redundancy