Concept Guide

e. To allow the APs to process RFC 3576-compliant Change of Authorization (CoA) and disconnect
messages from the RADIUS server, set RFC 3576 to Enabled. Disconnect messages cause a user session
to be terminated immediately, whereas the CoA messages modify session authorization attributes such
as data filters.
f. If RFC 3576 is enabled, specify an AirGroup CoA port if required.
g. Enter the NAS IP address.
h. Specify the NAS identifier to configure strings for RADIUS attribute 32 and to send it with RADIUS
requests to the RADIUS server.
4. Click OK.
In the CLI
Execute the following commands:
(Instant AP)(config)# wlan auth-server <profile-name>
(Instant AP)(Auth Server "name")# ip <host>
(Instant AP)(Auth Server "name")# radsec [port <port>]
(Instant AP)(Auth Server "name")# rfc3576
(Instant AP)(Auth Server "name")# nas-id <id>
(Instant AP)(Auth Server "name")# nas-ip <ip>
(Instant AP)(Auth Server "name")# end
(Instant AP)(Auth Server "name")# commit apply
Associate the Server Profile with a Network Profile
1. Access the WLAN wizard or Wired Settings window.
l To open the WLAN wizard, select an existing SSID on the Network tab, and click edit.
l To open the wired settings window, click More > Wired. In the Wired window, select a profile and click
Edit.
You can also associate the authentication servers when creating a new WLAN or wired profile.
2. Click the Security tab and select a splash page profile.
3. Select an authentication type.
4. From the Authentication Server 1 drop-down list, select the server name on which RadSec is enabled.
5. Click Next and then click Finish.
In the CLI
To associate an authentication server to a WLAN SSID:
(Instant AP)(config)# wlan ssid-profile <name>
(Instant AP)(SSID Profile <name># auth-server <server-name>
(Instant AP)(SSID Profile <name># end
((Instant AP)# commit apply
To associate an authentication server to a wired profile:
(Instant AP)(config)# wired-port-profile <name>
(Instant AP)(wired ap profile <name>)# auth-server <name>
(Instant AP)(wired ap profile <name>)# end
(Instant AP)# commit apply
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Authentication and User Management | 170