Concept Guide

124 | Wired Profiles Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
(Instant AP)(wired ap profile <name>)# set-role-machine-auth <machine_only> <user-only>
(Instant AP)(wired ap profile <name>)# end
(Instant AP)# commit apply
To configure unrestricted access:
(Instant AP)(config)# wired-port-profile <name>
(Instant AP)(wired ap profile <name>)# set-role-unrestricted
(Instant AP)(wired ap profile <name>)# end
(Instant AP)# commit apply
Assigning a Profile to Ethernet Ports
You can assign profiles to Ethernet ports using the Instant UI or CLI.
In the Instant UI
To assign profiles to Ethernet ports:
1. Click the Wired link under More at the top right corner of the Instant main window. The Wired window is
displayed.
2. To assign an Ethernet downlink profile to Ethernet 0 port:
a. Ensure that the wired bridging on the port is enabled. For more information, see Configuring Wired
Bridging on Ethernet 0 for Mesh Point on page 327.
b. Select and assign a profile from the 0/0 drop down list.
c. To assign a wired profile to Ethernet 0/1 port, select the profile from the 0/1 drop down list.
d. If the W-IAP supports E2, E3 and E4 ports, assign profiles to other Ethernet ports by selecting a profile
from the 0/2, 0/3, and 0/4 drop-down list.
In the CLI
To assign profiles to Ethernet ports:
(Instant AP)(config)# enet0-port-profile <name>
(Instant AP)(config)# enet1-port-profile <name>
(Instant AP)(config)# enet2-port-profile <name>
(Instant AP)(config)# enet3-port-profile <name>
(Instant AP)(config)# enet4-port-profile <name>
(Instant AP)(config)# end
(Instant AP)# commit apply
Editing a Wired Profile
To edit a wired profile:
1. Click the Wired link under More at the top right corner of the Instant main window. The Wired window is
displayed.
2. In the Wired window, select the wired profile to modify.
3. Click Edit. The Edit Wired Network window is displayed.
4. Modify the required settings.
5. Click Finish to save the modifications.
Deleting a Wired Profile
To delete a wired profile: