Setup Guide

205H-MNT1 Wall Mount Kit | Installation Guide 3
Figure 4 Securing 205H access point to Mount
8. Push the AP against the holes and then downward until the posts engage the slots at the top of the
mounting holes.
9. (Optional) Once the AP is fastened onto the wall mount, insert the T8H Torx security screw into the hole
located at the upper-right side of the mount and tighten.
10. (Optional) If not using PoE, connect the AC-DC power adapter to the DC power socket located on the
right side of the 205H access point (AP-AC-48V36 sold separately).