Setup Guide

2 205H-MNT1 Wall Mount Kit | Installation Guide
Figure 2 Attaching Wall Mount to Gang Wall Box (Worldwide Single Gang Outlet Box Shown)
Figure 3 Attaching Wall Mount to Wall Gang Box (US Single Gang Outlet Box Shown)
5. Remove the #6-32 machine screws from their bag and screw the mount onto the wall box, as shown in
Figure 2 and Figure 3.
6. Connect any required cables to the rear of the AP.
7. Align the mounting slots on the back of the 205H access point with the corresponding posts on the wall
mount, as shown in Figure 4.