Concept Guide

452| interface fastethernet | gigabitethernet Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
med
Enables the LLDP MED
protocol.
— disabled
receive
Enables processing of LLDP
PDU received.
— disabled
transmit
Enables LLDP PDU transmit. — disabled
transmit-hold
<1-100>
Set the transmit hold
multiplier.
1-100 4
transmit-interval
<1-3600>
Sets the transmit interval in
seconds.
1-3600 30
no
Negates any configured
parameter.
— —
port monitor
Monitors another interface on
the controller.
— —
priority-map
Applies a priority map to the
interface. Use the priority-
map command to configure a
priority map which allows you
to map ToS and CoS values
into high priority traffic
queues.
— —
shutdown
Causes a hard shutdown of
the interface.
— —
spanning-tree
Enables Rapid spanning tree
or Per-VLAN spanning tree.
— enabled
bpduguard
Enables bpduguard on the
edge ports.
— disabled
cost
Administrative cost associated
with the spanning tree.
1-65535 19 (Fast
Ethernet)
4 (Gigabit
Ethernet)
point-to-point
Set interface as point to point. — disabled