Concept Guide

Table Of Contents
dialer group
crypto-local
dialer group <name>
dial-string <string>
init-string <string>
no ...
Description
Configure a dialer group with dialing parameters for a USBmodem.
Syntax
Parameter Description
dial-string
The dial string column specifies the number to dial.
init-string
The init string can contain carrier-specific dialing options for the USBmodem. You
can often find these settings in online forums or from your ISP.
Usage Guidelines
Use this command to configure dial settings for a USBmodem connected to a controller.
Example
(host) (config) dialer group gsm_us
init-string AT+CGDCONT=1,"IP","ISP.CINGULAR"
Command History
Introduced in ArubaOS 3.4.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master and local
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide dialer group | 347