Concept Guide

Parameter Description
upgrade-images
Clear all upgrade images used by the centralized licensing
feature.
voice
Clear all voice state information. Use the following
parameters:
l call-counters
l call-status
l statisticscac | tspec-enforcement
vpdn
Clear all VPDN configuration for L2TP and PPTP tunnel. Use
the following parameters:
l tunnel l2tp id <l2tp-tunnel-id>
l tunnel pptp id <pptp-tunnel-id>
web-cc cache <MD5-1> <MD5-2>
Clear web content category URLs from the datapath cache by
specifying the two MD5 values of the URL to be removed from
the cache. To view all entries in the datapath, and the MD5
values for each entry, issue the command show datapath
web-cc.
web-cc stats
Clear all web content classification statistics. To view current
statistics information, issue the command show web-cc
stats.
wms
Clear all WLAN management commands. Use the following
parameters:
l ap—clear — All AP related commands. Specify the BSSID
of the AP.
l client— Clear all wired client related commands. Specify
the MAC address of the client.
l probe — Clear all probe information. Specify the BSSID of
the probe.
Usage Guidelines
The clear command clears the specified parameters of their current values.
Example
The following command clears all aaa counters for all authentication servers:
(host) (config) #clear aaa authentication-server all
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide clear | 271