Concept Guide

ap wired-port-profile
ap wired-port-profile <profile>
aaa-profile <profile>
authentication-timeout <seconds>
bridge-role
clone
enet-link-profile <profile>
lldp-profile <profile>
no
portfast
portfast-trunk
rap-backup
shutdown
spanning-tree
wired-ap-profile <profile>
Description
This command configures a wired port profile.
Syntax
Parameter Description
aaa-profile <profile>
Name of a AAA profile to be used by devices connecting to the AP’s
wired port.
authentication-timeout
Authentication timeout value, in seconds, for devices connecting the
AP’s wired port. The supported range is 1-65535 seconds, and the
default value is 20 seconds.
bridge-role
Name of the bridge role. This is the role that is assigned to a user if
split-tunnel authentication fails.
clone <profile>
Create a new AP wired port profile based upon the values of an
existing profile.
enet-link-profile <profile>
Specify an Ethernet link profile to be used by devices associated with
this wired port profile. The Ethernet link profile defines the duplex
value and speed to be used by the port.
lldp-profile <profile>
Specify an LLDP profile to be used by devices associated with this wired
port profile. The LLDP profile specifies the type-length-value (TLV)
elements to be sent in LLDP PDUs.
no
Negates any defined parameter.
portfast
Enables portfast.
This parameter reduces the time taken for wired clients connected to
an AP to detect the link and before they can send data traffic.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap wired-port-profile | 228