Concept Guide

Table Of Contents
voice rtcp-inactivity
voice rtcp-inactivity {enable | disable}
Description
This command enables or diables the RTCP inactivity timer.
Syntax
Parameter Description
enable
Enables the RTCP inactivity timer.
disable
Disables the RTCP inactivity timer.
Usage Guidelines
You can enable the RTCP inactivity timer to clear a voip session if an on-hold client moves out of the coverage
area.
Example
The following command enables the RTCP inactivity timer:
(host) (config) #voice rtcp-inactivity enable
Command History
Version Description
ArubaOS 5.0
The rtcp-inactivity parameter was introduced to the voip command.
ArubaOS 6.0
This was part of the voip command in the earlier version. voip command
is now deprecated.
Command Information
Platforms Licensing Command Mode
All platforms This command requires the
PEFNG license
Config mode on master controller
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide voice rtcp-inactivity | 2221