Concept Guide

show lldp neighbor
show lldp neighbor interfaces [fastethernet <slot>/<module>/<port> | gigabitethernet
<slot>/<module>/<port> [detail]]
Description
This command displays information about LLDP peers.
Syntax
Parameter Description
fastethernet <slot>/<module>/<port>
Displays LLDP information on a fastethernet port.
gigabitethernet <slot>/<module>/<port>
Displays LLDP information on a gigabitethernet interface.
detail
Include details.
Example
The command in the first example below shows that the ports GE 0/0/3 and GE0/0/4 recognize each other as
an LLDP peers.
(host)#show lldp neighbor
Capability codes: (R)Router, (B)Bridge, (A)Access Point, (P)Phone, (O)Other
LLDP Neighbor Information
-------------------------
Local Intf Chassis ID Capability Remote Intf Expiry-Time (Secs)
--------- ----------- ----------- ----------- ------------------
GE0/0/3 00:0b:86:6a:25:40 B:R GE0/0/17 105
GE0/0/4 00:0b:86:6a:25:40 B:R GE0/0/18 105
System name
-----------
Dell W-7220
Dell W-7220
Number of neighbors: 2
(host) #show lldp neighbor interface gigabitethernet 0/0/3 detail
Interface: gigabitethernet1/3, Number of neighbors: 1
------------------------------------------------------------
Chassis id: d8:c7:c8:ce:0d:63, Management address: 192.168.0.252
Interface description: bond0, ID: d8:c7:c8:ce:0d:63, MTU: 1522
Device MAC: d8:c7:c8:ce:0d:63
Last Update: Thu Sep 27 10:59:37 2012
Time to live: 120, Expires in: 103 Secs
System capabilities : Bridge,Access point
Enabled capabilities: Access point
System name: IAP-105
System description:
ArubaOS (MODEL: 105), Version 6.1.3.4-3.1.0.0 (35380)
Auto negotiation: Supported, Enabled
Autoneg capability:
10Base-T, HD: yes, FD: yes
100Base-T, HD: yes, FD: yes
1000Base-T, HD: no, FD: yes
Media attached unit type: 1000BaseTFD - Four-pair Category 5 UTP, full duplex mode (30)
MAC: 7c:d1:c3:c7:e9:72: Blacklist
MAC: 9c:b7:0d:7d:0b:72: Blacklist
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show lldp neighbor | 1682