Concept Guide

1677| show license-usage Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
AP Licenses
-----------
Type Number
---- ------
AP Licenses 512
RF Protect Licenses 512
PEF Licenses 512
Overall AP License Limit 512
AP Usage
--------
Type Count
---- -----
Active CAPs 3
Standby CAPs 0
RAPs 0
Remote-node APs 0
Tunneled nodes 0
Total APs 3
Remaining AP Capacity
---------------------
Type Number
---- ------
CAPs 509
RAPs 509
When you issue the show license-usage client command from the command-line interface of a controller
configured as a centralized licensing server, the output displays license usage statistics for each licensing client
associated to that server. The output in the example below is separated into two tables to better fit in this
document. In the ArubaOS command-line interface, the output appears in a single wide table.
License Clients License Usage
-----------------------------
Hostname IP Address AP Lic. Used PEF Lic. Used RF Protect Lic. Used
-------- ---------- ------------ ------------- --------------------
controller_corp11 192.0.2.10 16 1 1
controller_corp17 192.0.2.12 16 1 1
xSec Lic. Used ACR Lic. Used Last update (secs. ago)
-------------- ------------- -----------------------
0 0 16
1 0 18
Total AP Licenses Used :32
Total PEF Licenses Used :2
Total RF Protect Licenses Used :2
Total XSEC Licenses Used :1
Total ACR Licenses Used :0
Total no. of clients :2
The output of the show license-usage client command includes the following data columns:
Parameter Description
Hostname
Name of the licensing client controller.
IP Address
IP address of the licensing client controller.
AP
Total number of AP licenses used by a licensing client associated with this
controller.