Concept Guide

ap image-preload
ap image-preload
activate all-aps|specific-aps
add {ap-group <ap-group> | ap-name <ap-name>}
cancel
clear-all
delete {ap-group <ap-group> | ap-name <ap-name>}
[partition <part-num>]
[max-downloads <max-downloads>]
Description
Configure APs to preload a new software image from a controllerbefore the controller starts actively running
the new image.
Syntax
Parameter Description
activate
Issue the ap image-preload activate command to activate this
feature, allowing APs in the preload list to start downloading their
new image from the controller.
all-aps
All APs will be allowed to pre download the image.
specific-aps
Only APs in the preload list will be allowed to preload the image.
add
Add individual APs or AP groups to the list of APs allowed to preload
the image.
ap-group <group>
Add a group of APs to the preload list.
ap-name <name>
Add an individual AP to the preload list.
cancel
Cancel the AP preload and clear the preload list. Any APs
downloading a new image at the time this command is issued will
continue to download the file.
clear-all
Clear all APs from the preload list.
delete
Delete an individual AP or AP group from the preload list.
NOTE: This command may be issued before or after preloading is
activated. If it is executed after preloading has already been
activated, any APs downloading a new image at the time this
command is issued will continue to download the file. APs that are
still waiting to preload will be removed from the preload list.
ap-group <group>
Remove the specified group of APs from the preload list
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap image-preload | 165