Concept Guide

show ap spectrum device-summary
show ap spectrum device-summary {ap-name <ap-name>}|{ip-addr <ip-addr>} freq-band 2.4ghz|5ghz
Description
This command shows the numbers of wi-fi and non-Wi-Fi device types on each channel monitored by a
spectrum monitor or hybrid AP
Syntax
Parameter Description
ap-name <ap-name>
Name of the spectrum monitor or hybrid AP for which you want to view
spectrum information.
ip-addr <ip-addr>
IP address of the spectrum monitor or hybrid APfor which you want to view
spectrum information.
freq-band 2.4ghz|5ghz
View information for a specific radio type, either 2.4 GHz or 5 GHz.
Usage Guidelines
Use this command to show the types of devices that the spectrum device can detect on each channel it
monitors. For additional details about non-Wi-Fi device types shown in this table, see Non-Wi-Fi Interferers on
page 1299.
Examples
The output of this example shows that the spectrum monitor ap123 is able to detect 61wi-fi devices on
channel 149g.
(host) #show ap spectrum device-summary ap-name ap123 freq-band 5ghz
Device Summary Table
--------------------
Device 149 153 157 161 165
------- --- --- --- --- ---
Unknown 0 0 0 0 0
WIFI 61 6 14 29 9
Microwave 0 0 0 0 0
Bluetooth 0 0 0 0 0
Generic Fixed Freq 0 0 0 0 0
Cordless Phone FF 0 0 0 0 0
Video 0 0 0 0 0
Audio 0 0 0 0 0
Generic Freq Hopper 0 0 0 0 0
Cordless Phone FH 0 0 0 0 0
Xbox 0 0 0 0 0
Microwave Inverter 0 0 0 0 0
Total:12
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap spectrum device-summary | 1311