Concept Guide

show ap debug usb
show ap debug usb
ap-name <ap-name>
ip-addr <ip-addr>
ip6-addr <ip6-addr>
Description
This command displays the USB information provisioned on the RAP.
Syntax
Parameter Description
ap-name <ap-name>
Show system status data for an AP with a specific name.
ip-addr <ip-addr>
Show system status data for an AP with a specific IP address by entering an IP
address in dotted-decimal format.
ip6-addr <ip6-addr>
Show system status data for an AP with a specific IPv6 address by entering an
IPv6 address in dotted-decimal format.
Usage Guidelines
Use this command to view the USB information provisioned on the RAP.
Examples
The output of the command shows the USB information provisioned on the RAP.
(host) #show ap debug usb ap-name RAP2
USB Information
---------------
Parameter Value
--------- -----
Manufacturer Pantech,
Product PANTECH
Serial Number
Driver ptuml_cdc_ether
Vendor ID 106c
Product ID 3718
USB Modem State Active
USB Uplink RSSI(in dBm) -73
Supported Network Services CDMA GSM LTE
Firmware Version L0290VWB522F.242
ESN Number 990000472325325
Current Network Service 4G-LTE
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap debug usb | 1150