Concept Guide

1137| show ap debug received-config Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Country Code
Display the country code for the AP. The country code
specifies allowed channels for that country.
ESSID
An Extended Service Set Identifier (ESSID), for the AP.
Encryption
Encryption type used on this AP.
WPA2 Pre-Auth
802.11x settings are enabled or disabled.
DTIM Interval
Number of beacons that should elapse before an AP sends
beacon broadcasts for power save clients.
802.11a Basic Rates
Minimum data rate required for a client to associate with
the AP. For an 802.11a radio, this value can be 6, 12 and 24
802.11 data rates. 802.11b/g radios will report a value of 1
and 2 802.11 data rates.
802.11a Transmit Rates
802.11 data rate at which the AP will transmit data to its
clients. This value can be
6-54 for 802.11a radios, and 1-54 for 802.11b/g radios.
Station Ageout Time
Number of seconds a station may be idle before it is
deauthorized from an AP.
Max Transmit Attempts
maximum number of times the AP will attempt to retransmit
data.
RTS Threshold
The minimum packet size at which the AP will issue a
request-to-send (RTS) before sending the packet.
Max Associations
The maximum number of clients allowed to associated with
the AP
Wireless Multimedia (WMM)
Shows if Wireless Multimedia (WMM) is enabled or disabled
for this AP. WMM provides prioritization of specific traffic
relative to other traffic in the network.
WMM TSPEC Min Inactivity Interval
Displays the minimum inactivity time-out threshold of WMM
traffic for this AP.
DSCP mapping for WMM voice AC
Displays the DSCP value used to map WMM voice traffic.
DSCP mapping for WMM video AC
Displays the DSCP value used to map WMM video traffic.
DSCP mapping for WMM best-effort AC
Displays the DSCP value used to map WMM best-effort
traffic