Concept Guide

show ap debug ble-update-status
show ap debug ble-update-status {ap-name <ap-name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}
Description
This command displays the configuration update status for BLE devices seen by the AP. In addition, the
command displays the active versus desired configuration based on the configuration received from the BMC
(if any).
This command is supported in W-AP210 Series, W-AP220 Series (with external BLE USB), and W-AP320 Series.
Syntax
Parameter Description
ap-name
Displays the configuration update status for BLE devices seen by the AP based
on the AP name.
ip-addr
Displays the configuration update status for BLE devices seen by the AP based
on the IPv4 address.
ip6-addr
Displays the configuration update status for BLE devices seen by the AP based
on the IPv6 address.
Example
The output of this command displays the configuration update status for BLE devices seen by the AP. In
addition, the command displays the active versus desired configuration based on the configuration received
from the BMC (if any).
(host) #show ap debug ble-update-status ap-name ap325
BLE Device Table
----------------
BLE Device MAC Attribute Actual/Observed Desired/Pending
-------------- --------- --------------- ---------------
d0:39:72:d5:43:75 Tx Power 13 13
d0:39:72:d5:43:75 Major 1000 1000
d0:39:72:d5:43:75 Minor 1215 1215
d0:39:72:d5:43:75 UUID 5D3BCC63-BD6B-4FAF-906F-91C91519A69B 5D3BCC63-BD6B-4FAF-906F-
91C91519A69B
d0:39:72:d5:43:75 DWAS 0 0
c4:be:84:19:8b:a3 Tx Power 14 14
c4:be:84:19:8b:a3 Major 0 0
c4:be:84:19:8b:a3 Minor 0 0
c4:be:84:19:8b:a3 UUID 4152554E-F99B-4A3B-86D0-947070693A78 4152554E-F99B-4A3B-86D0-
947070693A78
c4:be:84:19:8b:a3 DWAS 0 0
c4:be:84:19:ec:67 Tx Power 14 14
c4:be:84:19:ec:67 Major 0 0
c4:be:84:19:ec:67 Minor 0 0
c4:be:84:19:ec:67 UUID 4152554E-F99B-4A3B-86D0-947070693A78 4152554E-F99B-4A3B-86D0-
947070693A78
c4:be:84:19:ec:67 DWAS 0 0
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap debug ble-update-status | 1063