Concept Guide

1022| show ap config Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Spectrum Monitoring
When this parameter is
enabled, it turns an AP in
ap-mode into a hybrid AP.
An AP in hybrid AP mode
will continue to serve
clients as an access point
while it scans and
analyzes spectrum
analysis data for a single
radio channel.
Assignment
Displays whether or not
ARM channel and power
assignment has been
enabled or disabled.
Allowed bands for 40MHz channels
Forty MHz channels may
be used on the specified
radio bands (802.11a or
802.11g).
Client Aware
Shows if the client aware
feature has been enabled
or disabled for this AP. If
enabled, AP will not
change channels when
there are active clients.
Max Tx Power
Maximum transmission
power for this AP, in dBm.
Min Tx Power
Minimum transmission
power for this AP, in dBm.
Multi Band Scan
Shows if the multi-band
scan feature has been
enabled or disabled on
this AP. If enabled, single-
radio APs will try to scan
across bands for Rogue
AP detection
Rogue AP Aware
Shows if the rogue AP
awareness feature has
been enabled or disabled
on this AP. If enabled, the
AP will try to contain off-
channel Rogue APs