Concept Guide

1018| show ap config Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Spectrum load balancing domain
Define a spectrum load
balancing domain to
manually create RF
neighborhoods.
This option creates RF
neighborhood information
for networks that have
disabled Adaptive Radio
Management (ARM)
scanning and channel
assignment.
l If spectrum load
balancing is enabled in
a 802.11a radio profile
but the spectrum load
balancing domain is
not defined, ArubaOS
uses the ARM feature
to calculate RF
neighborhoods.
l If spectrum load
balancing is enabled in
a 802.11a radio profile
and a spectrum load
balancing domain
isalso defined, AP
radios belonging to the
same spectrum load
balancing domain will
be considered part of
the same RF
neighborhood for load
balancing, and will not
recognize RF
neighborhoods defined
by the ARM feature.
Rx sensitivity tuning based channel reuse
The channel reuse feature
can operate in either of
the following three modes;
static, dynamic or disable.
(This feature is disabled
by default.)
l Static mode: This
mode of operation is a
coverage-based
adaptation of the Clear
Channel Assessment
(CCA) thresholds. In
the static mode of
operation, the CCA is
adjusted according to
the configured
transmission power
level on the AP, so as
the AP transmit power
decreases as the CCA