Concept Guide

1012| show ap config Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
l off: All LEDs off
Master controller IP address
For multi-controller
networks, this parameter
displays the IP address of
the master controller.
RF Band
For dual-band radios, this
parameter displays the RF
band in which the AP
should operate:
l g = 2.4 GHz
l a = 5 GHz
Double Encrypt
This parameter applies
only to remote APs.
Double encryption is used
for traffic to and from a
wireless client that is
connected to a tunneled
SSID. When enabled, all
traffic is re-encrypted in
the IPsec tunnel. When
disabled, the wireless
frame is only
encapsulated inside the
IPsec tunnel.
Native VLAN ID
Native VLAN for bridge
mode virtual APs (frames
on the native VLAN are not
tagged with 802.1q tags).
SAP MTU
Maximum Transmission
Unit (MTU) size, in bytes.
This value describes the
greatest amount of data
that can be transferred in
one physical frame.
Bootstrap threshold
Number of consecutive
missed heartbeats on a
GRE tunnel (heartbeats
are sent once per second
on each tunnel) before an
AP rebootstraps. On the
controller, the GRE tunnel
timeout is 1.5 x bootstrap-
threshold; the tunnel is
torn down after this
number of seconds of
inactivity on the tunnel.