Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
wmm-video-share <share>
Allocates bandwidth for video
traffic generated from video
streaming.
— —
wmm-voice-dscp <dscp>
Allows you to specify the DSCP
mapping value for the voice
traffic.
0—63 —
wmm-voice-share <share>
Allocates bandwidth for voice
traffic generated from the
incoming and outgoing voice
communication.
— —
work-without-uplink
Allows the SSID to be used
without an uplink connection
— —
wpa-passphrase <passphrase>
Defines a WPA passphrase
with which you can generate a
pre-shared key (PSK).
— —
zone <zone>
Allows you to specify a zone
for SSID. If an SSID belongs to
a zone, it is not broadcast on
any AP which does not belong
to the zone.
Usage Guidelines
Use this command to configure a WLAN SSID profile to set up an employee, voice, or guest network.
Example
The following example configures an employee WLAN SSID profile:
(Instant AP)(config)# wlan ssid-profile employee1
(Instant AP)(SSID Profile "employee1")# type employee
(Instant AP)(SSID Profile "employee1")# essid employee1
(Instant AP)(SSID Profile "employee1")# enable
(Instant AP)(SSID Profile "employee1")# vlan 1
(Instant AP)(SSID Profile "employee1")# wpa-passphrase user@123
(Instant AP)(SSID Profile "employee1")# opmode wpa2-psk-aes
(Instant AP)(SSID Profile "employee1")# max-authentication-failures 0
(Instant AP)(SSID Profile "employee1")# mac-authentication
(Instant AP)(SSID Profile "employee1")# l2-auth-failthrough
(Instant AP)(SSID Profile "employee1")# termination
(Instant AP)(SSID Profile "employee1")# blacklist
(Instant AP)(SSID Profile "employee1")# mac-authentication
(Instant AP)(SSID Profile "employee1")# auth-server InternalServer
(Instant AP)(SSID Profile "employee1")# rf-band all
(Instant AP)(SSID Profile "employee1")# dtim-period 1
(Instant AP)(SSID Profile "employee1")# inactivity-timeout 1000
(Instant AP)(SSID Profile "employee1")# broadcast-filter none
(Instant AP)(SSID Profile "employee1")# dmo-channel-utilization-threshold 90
(Instant AP)(SSID Profile "employee1")# local-probe-req-thresh 0
(Instant AP)(SSID Profile "employee1")# max-clients-threshold 64
(Instant AP)(SSID Profile "employee1")# set-role Group-Name contains wireless employee