Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
<operand> <vlan>|value-of}
following conditions:
l contains—The rule is
applied only if the attribute
value contains the specified
string.
l ends-with—The rule is
applied only if the attribute
value ends with the
specified string.
l equals—The rule is applied
only if the attribute value is
equal to the specified
string.
l not-equals—The rule is
applied only if the attribute
value is not equal to the
specified string.
l starts-with—The rule is
applied only if the attribute
value begins with the
specified string.
l value-of - This rule sets the
VLANto the value of the
attribute returned. To set a
user role, the value of the
attribute must already be
configured on the W-IAP.
l matches-regular-
expression—The rule is
applied only if the attribute
value matches the regular
expression pattern
specified in Operand. This
operator is available only if
the mac-address-and-
dhcp-options attribute is
selected in the Attribute
drop-down.
termination
Configures the EAP portion of
802.1X authentication on the
W-IAP, instead of the RADIUS
server.
When enabled, this command
reduces network traffic to the
external RADIUS server by
— Disabled