Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
L3 authentication (captive
portal authentication):
When reauthentication
succeeds, a pre-
authentication role is
assigned to the client that
is in a post-authentication
role. Due to this, the clients
are required to go through
captive portal to regain
access.
rf-band <band>
Configures the radio frequency
band on which this SSID will be
broadcast. You can select
either 2.4GHz, 5 GHz, or all to
specify both bands.
2.4 GHz, 5
GHz, all
all
server-load-balancing
Enables load balancing across
two RADIUS servers if two
authentication servers are
configured for the SSID.
— Enabled
set-role{{contains|ends-with|
equals|matches-regular-
expression|
not-equals|starts-with}
<operand> <role>|value-of}
Assigns a user role to the
clients. The first rule that
matches the configured
condition is applied.
You can set any of the following
conditions:
l contains—The rule is
applied only if the attribute
value contains the specified
string.
l ends-with—The rule is
applied only if the attribute
value ends with the
specified string.
l equals—The rule is applied
only if the attribute value is
equal to the specified
string.
l not-equals—The rule is
applied only if the attribute
value is not equal to the
specified string.
l starts-with—The rule is
applied only if the attribute
value begins with the
specified string.
— —