Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
traffic can be sent at the rate of
1-24 Mbps. The default rate for
sending frames for 2.4 GHz is 1
Mbps and 5.0 GHz is 6 Mbps.
okc-disable
Disables opportunistic key
caching (OKC).
In the OKC based roaming, the
AP stores one pairwise master
key (PMK) per client, which is
derived from last 802.1X
authentication completed by
the client in the network. The
cached PMK is used when a
client roams to a new W-IAP to
allow faster roaming of clients.
NOTE: If the wireless client
(the 802.1X supplicant) does
not support this feature, a
complete 802.1X
authentication is required
whenever it roams to a new W-
IAP. OKC is supported on
WPA2-AES Enterprise network
only.
— —
opmode <opmode>
Configures the layer-2
authentication and encryption
for this SSID to protect access
and ensure the privacy of the
data transmitted to and from
the network.
You can configure any of the
following types of encryption:
l opensystem—No
authentication and
encryption.
l wpa2-aes—WPA2 with AES
encryption and dynamic
keys using 802.1X.
l wpa2-psk-aes—WPA2 with
AES encryption using a
preshared key.
l wpa-tkip—WPA with TKIP
encryption and dynamic
keys using 802.1X.
l wpa-psk-tkip—WPA with
opensystem,
wpa2-aes,
wpa2-psk-
aes, wpa-tkip,
wpa-psk-tkip,
wpa-tkip
wpa2-aes,
wpa-psk-tkip
wpa2-psk-
aes, static-
wep,
dynamic-wep
opensystem