Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
dot11v
Enables 802.11v based BSS
transition.
— —
dtim-period <value>
Configures the Delivery Traffic
Indication Message (DTIM)
interval for the SSID profile.
The DTIMinterval determines
how often the W-IAP should
deliver the buffered broadcast
and multicast frames to
associated clients in the
powersaving mode.
When configured, the client
checks for buffered data on the
W-IAP at the specified number
of beacons. You can also
configure a higher value for
DTIM interval for power saving.
1–10 beacons 1
dynamic-multicast-optimization
Allows the W-IAP to convert
multicast streams into unicast
streams over the wireless link.
Enabling Dynamic Multicast
Optimization (DMO) enhances
the quality and reliability of
streaming video, while
preserving the bandwidth
available to the non-video
clients.
NOTE: When you enable DMO
on multicast SSID profiles,
ensure that the DMO feature is
enabled on all SSIDs
configured in the same VLAN.
— Disabled
enable
Re-enables the deactivated
SSIDs.
— Enabled
enforce-dhcp
Enforces dynamic VLAN
assignment for clients from the
DHCP server.
— Disabled
essid <essid>
Defines a name that uniquely
identifies a wireless network.
— —
external-server
Configures an external RADIUS
server for authentication.
— —