Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
drp-ip <IP-address> <mask> vlan
<vlan> gateway <gateway-IP-
address>
Configures the IP address, net mask
and VLAN,which will be used as
source address and VLAN for
RADIUSpackets.
NOTE: Before configuring DRP IP
address, ensure that dynamic
RADIUS proxy is enabled, and a
static Virtual Controller IP is
configured.
— —
ip <IP-address>
Configures the IPaddress of the
RADIUS server
— —
key <key>
Configures a shared key
communicating with the external
RADIUS server.
— —
nas-id <NAS-ID>
Configures Network Attached
Storage (NAS) identifier strings for
RADIUS attribute 32, which is sent
with RADIUS requests to the RADIUS
server.
— —
nas-ip <IP-address>
Configures the Virtual Controller IP
address as the NAS address which is
sent in data packets.
— —
port <port-name>
Configures the authorization port
number of the external RADIUS
server.
— 1812
retry-count <count>
Configures the maximum number of
authentication requests that can be
sent to the server group.
1-5 3
rfc3576
Allows the W-IAPs to process RFC
3576-compliant Change of
Authorization (CoA) and disconnect
messages from the RADIUS server.
Disconnect messages cause a user
session to be terminated
immediately, whereas the CoA
messages modify session
authorization attributes such as data
filters.
— Disabled
timeout <seconds>
Configures a timeout value in second
to determine when a RADIUS
request must expire.
The W-IAP retries to send the request
several times (as configured in the
1 to 30
seconds
5