Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
calea
Creates an access rule for CALEA
integration.
— —
captive-portal
{external [profile<name>]
|internal}
Configures a captive-portal role, to
assign to the users role after a
successful authentication.
— —
<index>
Creates an index entry for access
rules.
— —
rule
Creates an access rule.
You can create up to 128 access
control entries in an ACL for a user
role. However, it is recommended to
delete any existing configuration and
apply changes at regular intervals.
— —
<dest>
Allows you to specify the destination IP
address.
— —
<mask>
Specifies the subnet mask for the
destination IP address.
— —
<match>
l match—Indicates if the rule
specific to the destination IP
address and subnet mask
matches the value specified for
protocol.
l invert— Indicates if the rule
allows or denies traffic with an
exception to the specified
destination IP address and subnet
mask.
match
invert
—
<protocol>
Configures any of the following:
l Protocol number between 0-255
l any: any protocol
l tcp: Transmission Control Protocol
l udp: User Datagram Protocol
1-255 —
<sport>
Specifies the starting port number from
which the rule applies.
1-65534 —
<eport>
Specifies the ending port number until
which the rule applies
1-65534 —
dst-nat
Allows the W-IAP to perform
destination NAT on packets.
— —