Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
captive-portal{<type>
[exclude-uplink <types>]
|external[exclude-uplink
<types>| profile <name>
[exclude-uplink <types>]]}
Enables internal or external captive
portal authentication for the wired
profile users.
You can also disable redirection to
the captive portal based on the type
of current uplink.
If the external captive profiles are
created, you can specify the profile
name by using the external and
profile keywords and associated
parameters.
— —
content-filtering
Enables content filtering — —
dot1x
Enables 802.11X authentication for
the Wired profile users
— Disabled
duplex <duplex>
Assigns a value for duplexing client
traffic based on the capabilities of
the client, the AP, and the cable.
You can specify full, half, or auto.
full, half, auto auto
l2-auth-failthrough
Allows the clients to use 802.1X
authentication when MAC
authentication fails.
— Disabled
mac-authentication
Enables MAC authentication — Disabled
native-vlan <vlan>
Configures a value for Native
VLAN. A VLAN that does not have a
VLAN ID tag in the frames is
referred to as Native VLAN.
1-4093 —
poe
Enables power over Ethernet
— Enabled
radius-reauth-interval
<minutes>
Configures a reauthentication
interval at which all associated and
authenticated clients must be
reauthenticated.
— —
server-load-balancing
Enables load balancing across two
RADIUS servers if two
authentication servers are
configured for the SSID.
— Enabled
set-role <attribute>
{{equals| not-equal|starts-
with|
Assigns a user role to the clients.
The first rule that matches the
configured condition is applied.
— —