Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
wired-port-profile
wired-port-profile <port>
access-rule-name <name>
allowed-vlan <vlan>
auth-server <name>
captive-portal {<type>[exclude-uplink <types>]|external[exclude-uplink <types>| profile
<name>[exclude-uplink <types>]]}
content-filtering
dot1x
duplex <duplex>
l2-auth-failthrough
mac-authentication
native-vlan <vlan>
poe
radius-reauth-interval <minutes>
server-load-balancing
set-role <attribute>{{equals|not-equal|starts-with|ends-with|contains} <operator>
<role>|value-of}
set-role-mac-auth <MAC-authentication>
set-role-machine-auth <machine-only> <user-only>
set-role-pre-auth <role>
set-role-unrestricted
set-vlan <attribute>{equals|not-equals|starts-with|ends-with|contains} <operator> <VLAN-
ID>|value-of}
shutdown
spanning-tree
speed <speed>
switchport-mode <mode>
type <type>
uplink-enable
no…
Description
This command configures a wired port profile for wired W-IAP clients.
Syntax
Command/Parameter Description Range Default
wired-port-profile <port>
Creates a wired profile. — —
access-rule-name <name>
Maps the already configured
access rules with the wired profile.
— —
allowed-vlan <vlan>
Configures a list of allowed VLANs.
The Allowed VLAN refers to the
VLANs carried by the port in Access
mode.
You can configure the list of comma
separated digits or ranges 1,2,5 or
1-4, or all.
— —
auth-server <name>
Configures the authentication
server for the wired profile.
— —