Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Parameter Description
l Rx Packets - Displays information about packets received.
l Tx Packets - Displays information about packets transmitted.
l Rx Mcasts - Displays information about multicast packets received.
l Tx Mcasts - Displays information about multicast packets transmitted.
l ARP Proxy Pkts - Displays information packets resolved to destination IP
address by the proxy Address Resolution Protocol (ARP)
l Tx Jumbo MTU - Displays information about the Maximum Transmission Unit
(MTU) in jumbo frames.
l Rx HB
l Tx HB
l MTU Reqs - Indicates the number of MTUrequests sent.
l MTU Resps - Indicates the number of MTUresponses received.
l HB Mismatch
l IP Mismatch - Indicates IP address mismatch if any
l Type
l Vlan Translations - Displays details about VLAN translation.
show l3-mobility events
The following example shows the output of the show l3-mobility events command:
L3 Mobility Events
------------------
Time Client MAC Event IP Dir
---- ---------- ----- -- ---- May 9 23:26:29 08:ed:b9:e1:51:87 Station Offline 10.17.88.59 <-
May 9 23:26:29 08:ed:b9:e1:51:87 Potential Foreign Client10.17.88.59 <-
May 9 23:09:05 08:ed:b9:e1:51:87 This Client is Normal 10.17.88.59 ->
Peer IP Home Vlan VAP Vlan Tunnel ID Old AP IP FAP IP HAP IP VC IP Additional Info
---- ---------- -------- ------- --------- -------- ----- ---- ---------
self - 1 - - - - - -
self - - - - - - - -
self - 1 - - 10.17.88.59 - l2-timed-out,test
The output of this command provides the following information:
Parameter Description
Time
Indicates the timestamp of the L3 mobility event.
Client MAC
Indicates the MAC address of the roaming clients.
Event
Provides a description of the mobility event.
IP
Indicates the IP address of the roaming client.
Dir
Indicates if the client has roamed in or out of the mobility subnet.