Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Command/Parameter Description Range Default
calc-interval<seconds>
Configures an interval at which client
match is calculated.
10-600 30
seconds
calc-threshold <threshold>
Configures a threshold that takes
acceptance client count difference among
all the channels of Client match into
account. When the client load on an AP
reaches or exceeds the threshold in
comparison, client match is enabled on that
AP.
1-255 2
debug <level>
Displays information required for
debugging client match issues.
0-4
0—none, 1—
error, 2—
information,
3—debug,
4—dump
0
holdtime <number>
Configures a hold time for client match. 1—1800 900
max-adoption <count>
Configure a maximum number for adopting
clients.
0-100 5
max-request <count>
Configures the maximum number of
requests for client match.
0-100 5
nb-matching <percentage>
Configures a percentage value to be
considered in the same virtual RF
neighborhood of Client match.
20-100% 75%
slb-mode <mode>
Configures a balancing strategy for client
match.
1—3
1—Channel-
based
2—Radio-
based
3—Channel
and Radio
based
1
g-channels <g-channel>
Configures 2.4 GHz channels. — —
min-tx-power <power>
Sets the minimum transmission power. This
indicates the minimum Effective Isotropic
Radiated Power (EIRP). If the minimum
transmission EIRP setting configured on an
AP is not supported by the AP model, this
value is reduced to the highest supported
power setting.
0-127 dBm 18
max-tx-power <power>
Sets the highest transmit power levels for
0-127 dBm 127